NEMA17 Stepper Motor Pack

This NEMA 17 stepper motor pack is perfect for any project requiring accurate motor control, and also makes excellent linear movements with a threaded rod and a nut.

Stepper motors differ from DC Motors as they rotate by a certain angle (a 'step') rather than rotating continuously.  NEMA17 motors are typically used for 3D printers due to their accuracy, but can be used for anything that you can attach to the shaft.

These NEMA17 motors runs on 12VDC, and has 200 steps per revolution (1.8 degrees per step). The pre-threaded holes accommodate M3 sized bolts.  The NEMA17 motors require a motor driver to power and control the motor (included).

What is included per pack:

• 1x NEMA17 Stepper Motor
  
• 1x Stepper motor driver
• 1x 170 pin breadboard
  

If you need an additional 5V power supply for sensors on or near the motor, we recommend purchasing the Easy Driver Stepper motor driver.